Stepper Motor Driver Specifications:
1 High performance, low price
2 voltage 18V-50VDC.
3 For neam23 and nema17 motor
4 less than 4.2A current
5 300g weight
Stepper motor driver:
Introduction:
M542MA is a type of two-phase hybrid stepping motor driver, the drive voltage of it is from
18VDC to 50VDC. It is designed for use with 2-phase hybrid stepper motor of all kinds with
42mm to 86mm outside diameter and less than 4.0A phase current. This circuit that it adopts
Is smiliar to the circuit of servo control which enables the motor run smoothly almost without
Noise and vibration. Holding torque when M542MA run under high speed is also significantly
Higher than the other two-phase driver, what's more, the positioning accuracy is also higher.
It is widely used in middle and big size numerical control devices such as curving machine,
CNC machine, and computer embroider machine, packing machines and so on.
Features:
L High performance, low price
L Average current control, 2-phase sinusoidal output current drive
L Supply voltage from 18VDC to 50VDC
L Opto-isolated signal I/O
L Overvoltage, under voltage, overcurrent, phase short circuit protection
L 15 channels subdivision and automatic idle-current reduction
L 8 channels output phase current setting
L Offline command input terminal
L Motor torque is related to speed, but not related to step/revolution
L High start speed
L High hording torque under high speed
| Input voltage |
18-50VDC |
| Input current |
< 4A |
| Output current |
1.0A~4.2A |
| Consumption |
Consumption:80W; Internal Insurance:6A |
| Temperature |
Working Temperature -10~45°C; Stocking temperature -40°C~70°C |
| Humidity |
No condensation, no water droplets |
| gas |
Prohibition of combustible gases and conductive dust |
| weight |
300G |
Function choice ( Using DIP pins to achieve this function) 1) Micro step resolution is set by SW 5,6,7,8 of the DIP switch as shown in the following table:
| SW5 |
OFF |
ON |
OFF |
ON |
OFF |
ON |
OFF |
ON |
OFF |
ON |
OFF |
ON |
OFF |
ON |
OFF |
| SW6 |
ON |
OFF |
OFF |
ON |
ON |
OFF |
OFF |
ON |
ON |
OFF |
OFF |
ON |
ON |
OFF |
OFF |
| SW7 |
ON |
ON |
ON |
OFF |
OFF |
OFF |
OFF |
ON |
ON |
ON |
ON |
OFF |
OFF |
OFF |
OFF |
| SW8 |
ON |
ON |
ON |
ON |
ON |
ON |
ON |
OFF |
OFF |
OFF |
OFF |
OFF |
OFF |
OFF |
OFF |
| PULSE/REV |
400 |
800 |
1600 |
3200 |
6400 |
12800 |
25600 |
1000 |
2000 |
4000 |
5000 |
8000 |
10000 |
20000 |
25000 |
2 Closest to your motor's required current
| Output current (A) |
| SW1 |
SW2 |
SW3 |
PEAK |
RMS |
| ON |
ON |
ON |
1.00 |
0.71 |
| OFF |
ON |
ON |
1.46 |
1.04 |
| ON |
OFF |
ON |
1.91 |
1.36 |
| OFF |
OFF |
ON |
2.37 |
1.69 |
| ON |
ON |
OFF |
2.84 |
2.03 |
| OFF |
ON |
OFF |
3.31 |
2.36 |
| ON |
OFF |
OFF |
3.76 |
2.69 |
| OFF |
OFF |
OFF |
4.20 |
3.00 |
Pins of motor & power:
| Motor and power pins |
1 |
A+ |
Motors wiring |
|
| 2 |
A- |
| 3 |
B+ |
| 4 |
B- |
| 5,6 |
DC+ DC- |
Power supply |
Power supply :DC18-50VDC |
1 Company Capacity
1. Production line
2. Test equipment:
3. Certificates:
4 Exhibitions And Customer Visit:
5. FAQ(Q=Question, A=Answer)
Q: What's your main products?
A:We currently produce Brushed Dc Motors, Brushed Dc gear Motors, Planetary Dc Gear Motors, Brushless Dc Motors, Stepper motors and Ac Motors etc. You can check the specifications for above motors on our website and you can email us to recommend needed motors per your specification too.
Q:How to select a suitable motor?
A:If you have motor pictures or drawings to show us, or you have detailed specs like voltage, speed, torque, motor size, working mode of the motor, needed life time and noise level etc, please do not hesitate to let us know, then we can recommend suitable motor per your request accordingly.
Q: Do you have customized service for your standard motors?
A:Yes, we can customize per your request for the voltage, speed, torque and shaft size/shape. If you need additional wires/cables soldered on the terminal or need to add connectors, or capacitors or EMC we can make it too.
Q
:Do you have individual design service for motors?
A:Yes, we would like to design motors individually for our customers, but it may need some mould charge and design charge.
Q:Can I have samples for testing first?
A:Yes, definitely you can. After confirmed the needed motor specs, we will quote and provide a proforma invoice for samples, once we get the payment, we will get a PASS from our account department to proceed samples accordingly.
Q:How do you make sure motor quality?
A:We have our own inspection procedures: for incoming materials, we have signed sample and drawing to make sure qualified incoming materials; for production process, we have tour inspection in the process and final inspection to make sure qualified products before shipping.
Q:What's your lead time?
A:Generally speaking, our regular standard product will need 25-30days, a bit longer for customized products. But we are very flexible on the lead time, it will depends on the specific orders
Q:What's your payment term?
A:For all our new customers, we will need 40% deposite, 60% paid before shipment.
Q:When will you reply after got my inquiries?
A:We will response within 24 hours once get your inquires.
Q:How can I trust you to make sure my money is safe?
A:We are certified by the third party SGS and we have exported to over 85 countries up to June.2017. You can check our reputation with our current customers in your country (if our customers do not mind), or you can order via alibaba to get trade assurance from alibaba to make sure your money is safe.
Q:What's the minimum order quantity?
A:Our minimum order quantity depends on different motor models, please email us to check. Also, we usually do not accept personal use motor orders.
Q:What's your shipping method for motors?
A:For samples and packages less than 100kg, we usually suggest express shipping; For heavy packages, we usually suggest air shipping or sea shipping. But it all depends on our customers' needs.
Q:What certifications do you have?
A:We currently have CE and ROSH certifications.
Q:Can you send me your price list?
A:Since we have hundreds of different products, and price varies per different specifications, we are not able to offer a price list. But we can quote within 24 hours once got your inquirues to make sure you can get the price in time.
Q:Can I visit your company?
A:Yes, welcome to visit our company, but please let us know at least two weeks in advance to help us make sure no other meetings during the day you visit us. Thanks!
Weclome contact with us if have any questions about this motor or other products!
Audited Supplier 
){kind=link}
){kind=link}